Новая дробилка древесины TEKNAMOTOR Skorpion 350 RB

новая дробилка древесины TEKNAMOTOR Skorpion 350 RB
Фото: новая дробилка древесины TEKNAMOTOR Skorpion 350 RB
1/17
Сравнить В избранное PDF
Цена:
договорная
Марка TEKNAMOTOR
Модель Skorpion 350 RB
Тип дробилка древесины
Год выпуска новый
Собственный вес 2450 кг
Место расположения Польша Ostrowiec Świętokrzyski
Дата размещения более 1 месяца
Autoline ID UN6220
Описание
Производительность 16 м3/ч
Габаритные размеры 4 м × 2.76 м × 2.65 м
Состояние
Состояние новый
Реклама
Дополнительная информация:
Дробилката Skorpion 350 RB е мобилен модел с барабанната система. Работи със селскостопански трактор с минимална мощност 100 кс, (540 об/мин). Поради големия размер на обработван материал, с диаметър до 250 мм, предназначена е за механическо товарене на дървесни отпадъци с помоща на хидравличен кран (стандартно оборудване включва основа за монтирането му). Голямо пространство за товарене на дървен материал; размер на гърлото 375 x 340 мм позволява за раздробяване на разпространените клонове и други обемни дьрвени отпадьци.

Дробилката използва системата за прибиране на дърва, която се състои от вградена в рокера назъбената прибираща ролка затягаща дърво с диаметъра 380 мм, и от масата за товарене със назъбена гъсеница дълга на 680 мм, предшествана със ръчно сгъваем капак за товарене.

Skorpion 350 RB може да бъде оборудван също с хидравлично сгъваем капак, в който е инсталирана назъбената гъсеница дълга на 600 mm.

Системата за прибиране на дърва се захранва със хидравлична помпа, намираща се в стандартно оборудване на дробилката; ролката и гъсениците се също захранват от тази помпа чрез системата на хидравлични двигатели с редуктори. Използване на системата на 6 режещи ножове подредени секторно (едно завъртане на барабана за един пълен разрез) осигурява големи възможности на дробилката със сравнително ниска мощност на трактора. Дизайнът на ножове позволява те да се точат по време на техния жизнени цикъл на номиналната дължина до 55 мм, по този начин продължавайки техния живот. Получаване на висока регулярност на стърготините е възможна благодарение на ситото монтирано под режещия барабан. Стърготините се избират изпод ситото с помоща на два транспортни шнека и пренасят се във изхвърлящ вентилатор, след където се изхвърлят през въртящ се комин (тръба).

Използвана в дробилката тръба за изхвърляне обръща се ръчно на 360° с помоща на винтов диск (като вариант може да се комплектува със хидравлично сгъваема изхвърляща тръба заедно със автоматичен контрол на винтов диск 240°, реализиран с помоща на на джойстик ).

Конструкцията на тази дробилка се монтира върху едноосно шаси, което дава възможност за теглене на дробилка по горски и полски пътища. Типично приложение на ос без спирачка позволява на Skorpion 350 RB да се движи със скоростта до 25 км/час. Skorpion 350 RB може да бъде обзаведен с ос със пружиниращо окачване (до 40 км/час) или хидравлично (до 80 км/час) – и двете оси имат пневматично спиране.

Положение на масата за зареждане на 90 градуса спрямо посоката на движение позволява едновременно да се транспортира дробилката и ремарке с помоща на един трактор (дробилката има засечка за теглене).

Дробилката е оборудвана с модерно LEDово осветление.

Като стандартно оборудване на дробилката Skorpiona 350 RB се използва една от най-модерните в Европа електронната система за контрол на работата (анти-стрес), която автоматично предотвратява претоварване на системата за задвижване чрез временно спиране на подаване на материал. Системата позволява по много прост начин да се промени настройките за работа на машината и да се я адаптира към индивидуалните нужди.

Програми наречени «дебела дървесина» и «тънка дървесина» решават за бърза промяна на начин на работа на машината. Следователно много е лесно да се адаптира работа на дробилка към материал раздробяван в момента, благодарение на което повишава се значително эфективността му.

Системата има вграден брояч на моточасове.

Произведените стърготини могат да се използват като енергетичен материал за изгаряне в пещите, като суровина за производство на мебелни бордове или за повторно смилане в чукови мелницию.

Покупка на дробилката Skorpion 350 RB е оптималното решение за фирми и предприятия в развитието на тяхната дейност в модерна и екологосъобразна посока.

Размери (д x ш x в) ≈4000 x 2260 (2760)* x [2650 стандартна тръба за изхвърляне] [2670 (4000)* сгъваема тръба за изхвърляне] [мм]
Тегло 2450 (без кран )** [кг]
Диаметър на материала ствол до 250 [мм]
Брой на ножовете (зависи от варианта на i режещия барабан 4 режеши + 1 подкрепващ [брой]
Скорост на подаване дo 21 [линеен м/мин]
Чипинг капацитет дo 16 [насипен м3/h]
Ширина на стърготините до 28 [мм] в зависимост от материала
Начин на подаване ролката и фидер тип гъсеницата с хидравлично задвижване
Диаметър на барабана 520 [мм]
Размери на гърлото (Ш x В) 375 x 340 [мм]
Дължина на гъсеницата масата 680, (капака 600)*** [мм]
Ситото - отвор 30x30 или 50x50 [мм]
Минималната мощност трактора 120 [кс]

()* - размери след монтиране, по време на работа
()** - тегло в зависимостта от оборудване на дробилката
()*** - в опцията

Стандартно оборудване:
- Ос за каране до 25 км/час.
- Ръчно сгъваем капак за товарене без гъсеницата.
- Тръба за изхвърляне със винтов диск 360°, дефлектора.
- Модерно освещение LED.
- Вала за отвеждане.
- Собствена хидравлична система.
- Електронната система за контрол на работата (анти-стрес) за предотвратяване на претоварванеб с бояч на моточасове.

Опциите на оборудване:
- Ос със пружиниращо окачване (до 40 км/час) или хидравлично окачване (до 80 км/час) - и двете оси с пневматично спиране.
- Хидравлично сгъваема масата за товарене (капака) заедно с гъсеницата за товарене.
- Хидравлично сгъваема тръба за изхвърляне с автоматично контролиран винтов диск 240° и дефлектор.
- Повишаване на тръба за изхвърляне.
- Хидравличен кран.
- Контролиране с джойстик.
Skorpion 350 RB je bubnový štěpkovač spolupracující se zemědělským tahačem/traktorem s minimálním výkonem 100KM (540 obr./min). Štěpkovač, vzhledem na značné gabarity štěpeného materiálu s průměrem do 25 cm, je určen pro mechanické nakládání dřevitého odpadu pomocí hydraulického jeřábu (zdvihu) - standardně je vybaven základem pro jeho upevnění. Velký prostor pro nakládání dřeva - hrdlo s rozměry 375 x 340 mm - umožňuje štěpení rozložitých větví a jiných objemově obšírných dřevitých odpadů.

V štěpkovači je uplatněný systém vtahování dřeva, jenž se skládá z ozubeného válečku vbudovaného v kyvadle, který vtahuje a přitlačuje dřevo s průměrem 380 mm a nakládacího stolu s ozubeným housenkovým podávačem dlouhým 680 mm, před kterým je ručně skládaná nakládací klapka. Štěpkovač může být vybaven pro mechanické nakládání hydraulicky skládanou, nakládací klapkou s dodatečným housenkovým podávačem o délce 600 mm.

Soustava vtahování dřeva je napájena hydraulickým čerpadlem, kterým je štěpkovač standardně vybaven. Váleček a housenky jsou z tohoto čerpadla poháněny soustavou hydraulických motorů společně s reduktory.

Využití soustavy 4 řezacích nožů na bubnu, sektorově nastavených (jeden obrat bubnu na jeden úplný řez), zajišťuje dosažení velmi velkých možností štěpkovače při poměrně malém výkonu tahače. Konstrukce nožů umožňuje jejich zostření během používání z jejich nominální délky dokonce až o 55 mm, čímž prodlužuje jejich životnost.

Zajištění pravidelné štěpky je možné díky sítu namontovanému pod řezacím bubnem. Štěpka je vybírána spod síta dvěmi závitkovými dopravníky do vyhazovacího ventilátoru a jeho pomocí je vyhazována vyhazovací rourou. Vyhazovací roura je v štěpkovači otáčena ručně pomocí závitkové točnice o 360o (štěpkovač může být též vybaven hydraulicky skládanou, vyhazovací rourou spolu s automatickým ovládáním točnice o 240o vykonávaným pomocí Joysticku).

Konstrukce štěpkovače je osazena na jednoosém podvozku, což umožňuje vézt zařízení na silnicích všeho druhu. Typické uplatnění jízdní osy bez brzdy umožňuje Skorpionovi 350 RB se pohybovat rychlostí do 25 km/hod. Může též být vybaven jízdní osou s resorovanou (do 40 km/hod.) nebo pneumatickou nápravou (do 80 km/hod.) - obě osy mají pneumatickou brzdu.

Situování nakládajícího stolu s úhlem 90o vůči směru jízdy dovoluje současně převážet štěpkovač s přívěsem jedním tahačem/traktorem (štěpkovač má automatický tahací závěs).

Štěpkovač je vybaven moderním silničním osvětlením LED.

Ve standardním provedení Skorpiona 350 RB je k dispozici jeden z nejmodernějších systémů No-stress v Evropě. Automaticky zabraňuje přetížení pohonné soustavy, a to díky prozatímnímu zastavení podávající soustavy. Systém umožňuje velmi jednoduchým způsobem změnit nastavení práce zařízení a přizpůsobení ji individuálním potřebám. Programy s názvem: "silné dřevo" a "tenké dřevo" umožňují rychlou změnu režimu práce zařízení. Je tedy velmi jednoduché přizpůsobit práci štěpkovače aktuálně zpracovávanému materiálu, díky čemu se zvětšuje jeho efektivita. Tento systém má vestavěný počítač motorohodin.

Štěpky získané z dřevitých odpadů je možné využít jako energetický materiál pro spalování, surovinu pro výrobu nábytkových desek nebo pro další zpracování v kladívkových mlýnech.

Nákup štěpkovače Skorpion 350 RB je optimálním řešením pro podniky a firmy, které rozvíjejí svou činnost v rámci moderního a ekologického přístupu.

Rozměry (délka x šířka x výška) 4000 x 2260 (2760)* x [2650 standardní vyhazovací roura] [2670 (4000)* skládaná vyhazovací roura] [mm]
Hmotnost 2450 bez jeřábu** [kg]
Průměr materiálu kmen do 250 [mm]
Počet nožů 4 řezací + 1 podpůrný [ks]
Rychlost podávání do 21 [bm/min]
Výkon stroje do 16 [m3/h]
Šířka štěpky do 28 [mm] v závislosti na materiálu
Způsob podávání váleček a housenkový podávač s hydraulickým pohonem
Průměr řezacího bubnu 520 [mm]
Rozměry vstupu hrdla (šířka x výška) 375 x 340 [mm]
Délka housenice stůl 680, (klapka 600)*** [mm]
Síto (očko) 30x30 nebo 50x50 [mm]
Minimální výkon traktoru 100 [KM]

()* - rozměr po rozložení.
()** - hmotnost závisí na vybavení štěpkovače.
()*** - dostupný v opci.

Standardní vybavení:
- Jízdní osa do 25 km/hod.
- Nakládací stůl je vybaven housenicí a ručně skládanou nakládací klapkou bez housenice.
- Vyhazovací roura se závitkovou točnicí 360°, deflektor.
- Moderní silniční LED osvětlení.
- Hřídel odběru výkonu
- Vlastní hydraulický systém
- Systém proti přetížení No–stress s počítačem motorohodin.
- Automatický odtahový úchyt pro přívěs.

Opční vybaveni:
- Jízdní osa s resorovanou nápravou (do 40 km/hod.) nebo pneumatickou nápravou (do 80 km/hod.), osy vybavené pneumatickou brzdou.
- Hydraulicky skládaný nakládací stůl (klapka) spolu s nakládací housenicí.
- Hydraulicky skládaná vyhazovací roura spolu s automatickým ovládáním točnice o 240° a deflektorem.
- Zvýšení vyhazovací roury
- Hydraulický zdvih (jeřáb).
- Ovládání pomocí Joysticku.
Skorpion 350 RB ist der Trommelhacker zur Arbeit mit dem Schlepper min. 100 PS (540 U/min) vorgesehen.

Wegen der umfangreichen Holzabfällen bis 25 cm Durchmesser erfolg die Zuführung mit dem Kran, im Standardausrüstung hat der Holzhacker die Verbindungsplatten, auf denen der Kran aufgeschraubt ist.

Die große Einzugsöffnung 375 x 340 mm ermöglicht das Hacken der ausgebreiteten und anderen umfangreichen Holzabfällen.

Der Einzug des Holzhackers besteht aus der in der Schwinge eingebauten oberen Einzug- und Anpressrolle 380 mm Durchmesser und der unteren Stahlbandkette 680 mm Länge mit dem manuell vorangehenden ausklappbaren Tisch. Zur besseren Kranbeladung kann der Holzhacker mit dem hydraulisch ausklappbaren Tisch mit der zusätzlichen Stahlbandkette 600 mm Länge ausgerüstet werden.

Der Hydrauliksystem des Einzugs besteht im Standardausführung aus der Hydraulikpumpe und der Hydraulikmotoren mit den Grtrieben, die die Einzugsrolle und die Stahlbandketten antreiben. Der offene Trommel mit 4 versetzten Messer (eine Umdrehung der Trommel ein Schnitt) garantiert die grossen Möglichkeiten des Hackers bei dem niedriegen Kraftbedarf aus dem Schlepper. Die Konstruktion der Messer ermöglicht das Schleifen während des Gebrauchs selbst um 55 mm, indem man ihr Lebensdauer verlängert.

Die Regelmäßigkeit der Hackschnitzel garantiert die Anwendung des Siebes unter der Schneidtrommel. Die Hackschitzel werden vom Sieb mit zwei Schnecken in die Auswurfgebläse befördert und weiter durch das Auslaufsrohr ausgeworfen. Das Auslaufsrohr wird manuell durch die Drehschemel mit der Schnecke um 360° umgedreht. Der Hacker kann auch mit dem hydraulisch einklappbaren Auslaufsrohr durch die automatische Steuerung der Drehschemel um 240° mit Joystick ausgestattet werden.

Der Holzhacker ist auf einachsigem Fahrgestell für sicheres Fahren auf allen Straßenkategorien auch in dem schwierigen Gelände. Die Standardachse ohne Bremse lässt mit Geschwindigkeit bis 25 km/h fahren. Der Hacker kann auch mit der gefederten Fahrachse (bis 40 km/h) oder der pneumatischen Fahrachse (bis 80 km/h) ausgestattet werden. Beide Achsen haben die pneumatische Bremse. Die Lösung der seitlichen Lage der Einzugsöffnung ermöglicht gleichzeitige Beförderung des Holzhackers und Anhängers mit dem Schlepper (der Hacker hat die automatische Anhängerkupplung).

Im Standard ist der Holzhacker 350 RB mit dem einer der modernsten elektronischen Kontrollsystem No-Stress ausgerüstet, das automatisch die Überlastung des Antriebssystems durch momentanes Anhalten des Einzugs verhindert.

Die hergestellten Hackschnitzel können direkt zur Verbrennung in Ofen, zur Kompostherstellung, zur Dekoration in Grünanlagen und zur Weiterverarbeitung durch die Hammermühle.

Abmessungen (LxBxH) 4000 x 2260 (2760)* x [2650 Standardauslaufsrohr] [2670 (4000)* ausklappbares Auslaufrohr] [mm]
Gewicht 2450 ohne Kran** [kg]
Durchmesser von Holz Stamm bis 250 [mm]
Anzahl der Messer 4 Schneidmesser + 1 Gegenmesser [Stk.]
Einzugsgeschwindigkeit bis 21 [m/min]
Stundenleistung bis 16 [m3/h]
Hackschnizellänge bis 28 abhängig von Material [mm]
Art der Zuführung Rolle und Stahlbandkette mit dem hydraulischen Antrieb
Trommeldurchmesser 520 [mm]
Sieb (Loch) 30x30 oder 50x50 [mm]
Einzugsöffnung [BxH] 375 x 340 [mm]
Länge der Stahlbandkette Tisch 680, (Klappe 600)*** [mm]
Minimale Leistung des Schleppers 100 [PS]

()* - Abmessung nach Ausklappen
()** - Das Gewicht hängt von der Ausstattung der Hacker ab.
()*** - Option.

Standardausstattung:
- Fahrachse bis 25 km/h.
- Manuell ausklappbarer Tisch ohne Stahlbandkette.
- Auslaufsrohr mit der Drehschemel 360° mit der Schnecke, Umleitschaufel.
- Moderne Fahrzeugbeleuchtung LED.
- Zapfwelle.
- Eigenes Hydrauliksystem.
- No-stresssystem mit Stundenbetriebszähler.

Zusätzliche Ausstattung:
- Die gefederte Fahrachse (bis 40 km/h) oder die pneumatische Fahrachse (bis 80 km/h) ausgestattet. Beide Achsen haben die pneumatische Bremse.
- Der hydraulisch ausklappbare Tisch mit der zusätzlichen Stahlbandkette.
- Hydraulisch einklappbare Auslaufsrohr mit der automatischen Steuerung durch Drehschemel um 240° und der Umleitschaufel.
- Turmerhöhung.
- Kran.
- Steuerung mit Joystick.
Skorpion 350 RB is a drum model made in the form of a trailer, meant for collaboration with a min. 100 KM farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute.

The chipper is equipped with hydraulically folding loading table, in which a feeder track is installed. Pressing and waste-wood feeding into the cutting system is performed by toothed roll installed in a rocker. Both – the crawler and feeding roll are propelled by hydraulic motors powered by a hydraulic pump installed on board.

A sector-type drum with four cutting knives (one rotation of the drum for one full cut) allows to achieve a very high possibilities of the chipper with a relatively low power of the tractor. Knives can be sharpened several times, assuring theirs long-term use.

Installed screen ensures high regularity if chips. Chips are advanced from under the screen to the fan by two screw conveyors, than discharged thorough the ejection tube. Standard version of the chipper is equipped with manually swiveled by 360°ejection tube (optionally the chipper might be equipped with hydraulically foldable ejection tube with automatic swivel control by 240°, both controlled by joystick.

The construction of the chipper is set on a single axial chassis allowing the towing of the machine on all types of roads. As a standard, the machine is equipped with a rigid suspension without brake, allowing to move it with a speed up to 25 km/h. Chipper can also be equipped with a sprung axle and 40 km/h towing speed or an air-type suspension and 80 km/h speed – both axles are equipped with air brakes.

Loading table positioned at 90° to the direction of travel allows simultaneous transport of the chipper and trailer with a tractor (chipper is equipped with approved towing device).

Due to large size of the material to be chipped, the machine can be equipped with a hydraulic mounted crane.

The chipper is equipped with modern LED road lighting.

As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.

Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work. Total- and daily- hour meter is built into this system.

Chips made by Skorpion 350 RB can be used as a solid fuel for heating (burning in ovens/stoves), as a raw material for production of paper, furniture boards, and after additional disintegrating in a hammer mill for pellets and briquettes production.

Purchase of a chipper Skorpion 350 RB is the perfect solution for companies and businesses which develop their business in a modern and environmentally friendly direction.

Overall dimensions (LxWxH) 2800 (4000 with towing bar) x 2260 (2760)* x [2650 standard tube] [2670 (4000)* automatic tube] [mm]
Weight 2450** without hydraulic crane [kg]
Branch diameter logs up to 250 [mm]
No of knives 4 cutting + 1 counter-knife
Feeding speed up to 21 [running meters/min]
Chipping capacity up to 16 [stère meters/h]
Width of chips up to 28 depends on material [mm]
Drum diameter 520 [mm]
Hopper dimensions (WxH) 375 x 340 [mm]
Length of chain feeder loading table – 680 (flap 600)*** [mm]
Screen 30x30 or 50x50 [mm]
Min. power of tractor 100 [hp]

()* - unfolded, ready to work.
()** - weight depends on equipment installed.
()*** - available as an option.

Standard equipment:
- Axial chassis up to 25 km/h
- Manually folded flat without chain feeder
- Swivelled by360° ejection tube with deflector
- Modern LED road lighting
- PTO
- Own hydraulic system
- Electronic system of work control with hour meter

Optional equipment:
- Sprung axle (towing speed 40 km/h) or air-type suspension (up to 80 km/h) equipped with air brakes
- Hydraulically folding loading table (flap) equpped with a chain feeder
- Hydraulically foldable ejection tube with automatic control of swivel by 240 ° and deflector
- Extension of ejection tube
- Hydraulic crane
- Electronic control by joystick
Skorpion 350 RB is a drum model made in the form of a trailer, meant for collaboration with a min. 100 KM farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute.

The chipper is equipped with hydraulically folding loading table, in which a feeder track is installed. Pressing and waste-wood feeding into the cutting system is performed by toothed roll installed in a rocker. Both – the crawler and feeding roll are propelled by hydraulic motors powered by a hydraulic pump installed on board.

A sector-type drum with four cutting knives (one rotation of the drum for one full cut) allows to achieve a very high possibilities of the chipper with a relatively low power of the tractor. Knives can be sharpened several times, assuring theirs long-term use.

Installed screen ensures high regularity if chips. Chips are advanced from under the screen to the fan by two screw conveyors, than discharged thorough the ejection tube. Standard version of the chipper is equipped with manually swiveled by 360°ejection tube (optionally the chipper might be equipped with hydraulically foldable ejection tube with automatic swivel control by 240°, both controlled by joystick.

The construction of the chipper is set on a single axial chassis allowing the towing of the machine on all types of roads. As a standard, the machine is equipped with a rigid suspension without brake, allowing to move it with a speed up to 25 km/h. Chipper can also be equipped with a sprung axle and 40 km/h towing speed or an air-type suspension and 80 km/h speed – both axles are equipped with air brakes.

Loading table positioned at 90° to the direction of travel allows simultaneous transport of the chipper and trailer with a tractor (chipper is equipped with approved towing device).

Due to large size of the material to be chipped, the machine can be equipped with a hydraulic mounted crane.

The chipper is equipped with modern LED road lighting.

As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.

Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work. Total- and daily- hour meter is built into this system.

Chips made by Skorpion 350 RB can be used as a solid fuel for heating (burning in ovens/stoves), as a raw material for production of paper, furniture boards, and after additional disintegrating in a hammer mill for pellets and briquettes production.

Purchase of a chipper Skorpion 350 RB is the perfect solution for companies and businesses which develop their business in a modern and environmentally friendly direction.

Overall dimensions (LxWxH) 2800 (4000 with towing bar) x 2260 (2760)* x [2650 standard tube] [2670 (4000)* automatic tube] [mm]
Weight 2450** without hydraulic crane [kg]
Branch diameter logs up to 250 [mm]
No of knives 4 cutting + 1 counter-knife
Feeding speed up to 21 [running meters/min]
Chipping capacity up to 16 [stère meters/h]
Width of chips up to 28 depends on material [mm]
Drum diameter 520 [mm]
Hopper dimensions (WxH) 375 x 340 [mm]
Length of chain feeder loading table – 680 (flap 600)*** [mm]
Screen 30x30 or 50x50 [mm]
Min. power of tractor 100 [hp]

()* - unfolded, ready to work.
()** - weight depends on equipment installed.
()*** - available as an option.

Standard equipment:
- Axial chassis up to 25 km/h
- Manually folded flap without chain feeder
- Swivelled by 360° ejection tube with deflector
- Modern LED road lighting
- PTO
- Own hydraulic system
- Electronic system of work control with hour meter

Optional equipment:
- Sprung axle (towing speed 40 km/h) or air-type suspension (up to 80 km/h) equipped with air brakes
- Hydraulically folding loading table (flap) equipped with a chain feeder
- Hydraulically foldable ejection tube with automatic control of swivel by 240° and deflector
- Extension of ejection tube
- Hydraulic crane
- Electronic control by joystick
Skorpion 350 RB is a drum model made in the form of a trailer, meant for collaboration with a min. 100 KM farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute.

The chipper is equipped with hydraulically folding loading table, in which a feeder track is installed. Pressing and waste-wood feeding into the cutting system is performed by toothed roll installed in a rocker. Both – the crawler and feeding roll are propelled by hydraulic motors powered by a hydraulic pump installed on board.

A sector-type drum with four cutting knives (one rotation of the drum for one full cut) allows to achieve a very high possibilities of the chipper with a relatively low power of the tractor. Knives can be sharpened several times, assuring theirs long-term use.

Installed screen ensures high regularity if chips. Chips are advanced from under the screen to the fan by two screw conveyors, than discharged thorough the ejection tube. Standard version of the chipper is equipped with manually swiveled by 360°ejection tube (optionally the chipper might be equipped with hydraulically foldable ejection tube with automatic swivel control by 240°, both controlled by joystick.

The construction of the chipper is set on a single axial chassis allowing the towing of the machine on all types of roads. As a standard, the machine is equipped with a rigid suspension without brake, allowing to move it with a speed up to 25 km/h. Chipper can also be equipped with a sprung axle and 40 km/h towing speed or an air-type suspension and 80 km/h speed – both axles are equipped with air brakes.

Loading table positioned at 90° to the direction of travel allows simultaneous transport of the chipper and trailer with a tractor (chipper is equipped with approved towing device).

Due to large size of the material to be chipped, the machine can be equipped with a hydraulic mounted crane.

The chipper is equipped with modern LED road lighting.

As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.

Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work. Total- and daily- hour meter is built into this system.

Chips made by Skorpion 350 RB can be used as a solid fuel for heating (burning in ovens/stoves), as a raw material for production of paper, furniture boards, and after additional disintegrating in a hammer mill for pellets and briquettes production.

Purchase of a chipper Skorpion 350 RB is the perfect solution for companies and businesses which develop their business in a modern and environmentally friendly direction.

Overall dimensions (LxWxH) 2800 (4000 with towing bar) x 2260 (2760)* x [2650 standard tube] [2670 (4000)* automatic tube] [mm]
Weight 2450** without hydraulic crane [kg]
Branch diameter logs up to 250 [mm]
No of knives 4 cutting + 1 counter-knife
Feeding speed up to 21 [running meters/min]
Chipping capacity up to 16 [stère meters/h]
Width of chips up to 28 depends on material [mm]
Drum diameter 520 [mm]
Hopper dimensions (WxH) 375 x 340 [mm]
Length of chain feeder loading table – 680 (flap 600)*** [mm]
Screen 30x30 or 50x50 [mm]
Min. power of tractor 100 [hp]

()* - unfolded, ready to work.
()** - weight depends on equipment installed.
()*** - available as an option.

Standard equipment:
- Axial chassis up to 25 km/h
- Manually folded flat without chain feeder
- Swivelled by360° ejection tube with deflector
- Modern LED road lighting
- PTO
- Own hydraulic system
- Electronic system of work control with hour meter

Optional equipment:
- Sprung axle (towing speed 40 km/h) or air-type suspension (up to 80 km/h) equipped with air brakes
- Hydraulically folding loading table (flap) equpped with a chain feeder
- Hydraulically foldable ejection tube with automatic control of swivel by 240 ° and deflector
- Extension of ejection tube
- Hydraulic crane
- Electronic control by joystick
Skorpion 350 RB is a drum model made in the form of a trailer, meant for collaboration with a min. 100 KM farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute.

The chipper is equipped with hydraulically folding loading table, in which a feeder track is installed. Pressing and waste-wood feeding into the cutting system is performed by toothed roll installed in a rocker. Both – the crawler and feeding roll are propelled by hydraulic motors powered by a hydraulic pump installed on board.

A sector-type drum with four cutting knives (one rotation of the drum for one full cut) allows to achieve a very high possibilities of the chipper with a relatively low power of the tractor. Knives can be sharpened several times, assuring theirs long-term use.

Installed screen ensures high regularity if chips. Chips are advanced from under the screen to the fan by two screw conveyors, than discharged thorough the ejection tube. Standard version of the chipper is equipped with manually swiveled by 360°ejection tube (optionally the chipper might be equipped with hydraulically foldable ejection tube with automatic swivel control by 240°, both controlled by joystick.

The construction of the chipper is set on a single axial chassis allowing the towing of the machine on all types of roads. As a standard, the machine is equipped with a rigid suspension without brake, allowing to move it with a speed up to 25 km/h. Chipper can also be equipped with a sprung axle and 40 km/h towing speed or an air-type suspension and 80 km/h speed – both axles are equipped with air brakes.

Loading table positioned at 90° to the direction of travel allows simultaneous transport of the chipper and trailer with a tractor (chipper is equipped with approved towing device).

Due to large size of the material to be chipped, the machine can be equipped with a hydraulic mounted crane.

The chipper is equipped with modern LED road lighting.

As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.

Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work. Total- and daily- hour meter is built into this system.

Chips made by Skorpion 350 RB can be used as a solid fuel for heating (burning in ovens/stoves), as a raw material for production of paper, furniture boards, and after additional disintegrating in a hammer mill for pellets and briquettes production.

Purchase of a chipper Skorpion 350 RB is the perfect solution for companies and businesses which develop their business in a modern and environmentally friendly direction.

Overall dimensions (LxWxH) 2800 (4000 with towing bar) x 2260 (2760)* x [2650 standard tube] [2670 (4000)* automatic tube] [mm]
Weight 2450** without hydraulic crane [kg]
Branch diameter logs up to 250 [mm]
No of knives 4 cutting + 1 counter-knife
Feeding speed up to 21 [running meters/min]
Chipping capacity up to 16 [stère meters/h]
Width of chips up to 28 depends on material [mm]
Drum diameter 520 [mm]
Hopper dimensions (WxH) 375 x 340 [mm]
Length of chain feeder loading table – 680 (flap 600)*** [mm]
Screen 30x30 or 50x50 [mm]
Min. power of tractor 100 [hp]

()* - unfolded, ready to work.
()** - weight depends on equipment installed.
()*** - available as an option.

Standard equipment:
- Axial chassis up to 25 km/h
- Manually folded flat without chain feeder
- Swivelled by360° ejection tube with deflector
- Modern LED road lighting
- PTO
- Own hydraulic system
- Electronic system of work control with hour meter

Optional equipment:
- Sprung axle (towing speed 40 km/h) or air-type suspension (up to 80 km/h) equipped with air brakes
- Hydraulically folding loading table (flap) equpped with a chain feeder
- Hydraulically foldable ejection tube with automatic control of swivel by 240 ° and deflector
- Extension of ejection tube
- Hydraulic crane
- Electronic control by joystick
La déchiqueteuse Skorpion 350 RB est le broyeur à tambour en forme de la remorque, destiné à la collaboration avec un tracteur aratoire (tracteur minimum de 100 KM). La propulsion est transmise par le rouleau de la propulsion du tracteur (540 tours/minutes).En prenant en considération la grande taille du matériau pour le broyage, d'un diamètre à 25 cm, le broyer est dédié au chargement mécanique des déchets de bois à l'aide d'une grue hydraulique. En standard, le broyeur est équipé à une base à laquelle la grue est installée. Le grand espace de chargement du bois - les dimensions de la goulotte c'est 375 x 340 mm - permet de broyer les branches étalées et les autres déchets de bois.

Dans le broyeur, on utilise le système d'alimentation du bois qui se compose d'un rouleau denté d'alimentation situé au balancier, cette rouleau appuie le bois d'un diamètre 380 mm. Le système d'alimentation se compose de table de chargement avec le dispositif d'alimentation de chenille dentée de longueur 680 mm, qui est précédé par un volet de chargement plié manuellement. Pour le chargement mécanique, le broyeur peut être équipé d'un volet de chargement pliable, qui est équipé au dispositif d'alimentation de chenille supplémentaire de longueur de 600 mm.

Le système d'alimentaton du bois est entraîné par la pompe hydraulique qui est dans l'équipement standard du broyeur. Le rouleau et les chenilles sont entraînés de cette pompe par le système des moteurs hydrauliques avec les réducteurs.

L'utilisation du système de 4 lames qui sont montées sur le tambour par secteur (une rotation du tambour sur une coupe pleine) donne la possibilité de réaliser très grande performance du broyeur à relativement peu de force du tracteur. La construction des lames permet à leur affûtage d'une longueur nominale jusqu'à 55 mm, même en prolongeant ainsi leur durée de vie.

L'application du tamis situé sous le tambour de coupe assure l'obtention des copeaux de bois de haute qualité. Ces copeaux sont choisis dans le tamis par deux transporteurs à vis vers le ventilateur et ensuite ils sont éjectés par la chéminée. La cheminée tournante est mise en rotation manuellement au moyen d'une plaque tournante à vis de 360° (le broyeur peut également être équipé au tube d'éjection pliable hydrauliquement avec le contrôle automatique de la plaque tournante 240 ° réalisé à l'aide de la manche à balai).

La construction du broyeur est montée sur le châssis uniaxe ce qui permet de remorquer la machine sur tous les types de routes. La mise en pratique l'essieu sans frein permet à Skorpion 350 RB de déplacer à une vitesse à 25 km/h. Le broyeur peut être équipé à l'essieu avec la suspension de ressort jusqu'à 40 km/h ou avec la suspension pneumatique jusqu'à 80 km/h - ces essieux sont équipées au frien à air comprimé (frein pneumatique).

L’implantation de la table de chargement, sous le coin 90º par rapport à la direction de déplacement, permet de transporter simultanément du broyeur et de la remorque à l’aide d’un tracteur (le broyeur possède le crabot de remorquage automatique).

En standard, Skorpion 350 RB est équipé au système électronique du contrôle de travail, l'une de les plus modernes systèmes No-stress de l'Europe, qui prévient à la surcharge de l'arrangement de commande grâce à l'arrêt temporaire du système de livraison. Le logiciel du système No-stress est modifiable. Ce logiciel permet,de manière simple, de changer les paramètres de la machine et de s'adapter aux besoins individuels. Le programe « bois épais », « bois mince » permet de changer rapidement le mode de fonctionnement du broyeur pour l'adapter à la matière broyée actuellement et pour le fonctionnement du broyeur plus efficace. Ce système possède le compteur de motoheures.

Les copeuaux de bois obtenus à partir de déchets de bois peuvent être utilisés comme matériau énergétique pour la combustion, comme matière pour la production les plaques de meubles ou pour le traitement ultérieur dans les moulins à marteaux.

L'achat du broyeur Skorpion 350 RB est la solution optimale pour les entreprises et les firmes qui développent de leur entreprise dans une direction moderne et respectueuse de l'environnement.

Dimensions (lon. x lar. x hau.) 4000 x 2260 (2760)* x [2650 la chéminée d'éjection en standard] [2670 (4000)* la chéminée d'éjection pliable] [mm]
Poids 2450** sans grue [kg]
Branches de diamètre billot à 250 [mm]
Nombre de couteaux 4 lames + 1 appui de coupe [pièce]
Alimentation à 21 [m/min]
La capacité de Chipping à 16 [m3/h]
Mode d'administration rouleau et dispositif d'alimentation de chenille avec l'entraînement hydraulique
Diamètre du tambour 520 [mm]
Largeur du copeau de bois à 28 [mm] selon le matériau
Longueur de la chenille table 680, (volet 600)*** [mm]
Tamis (maille) 30X30 ou 50X50 [mm]
Choke dimensions (lar. x hau.) 375 x 340 [mm]
Minimum tracteur de puissance 100 [ch]

()* - dimension de la machine repliée
()** - poids dépend de l'équipement du broyeur
()*** - il y a dans l'option

Équipement standard:
- Essieu jusqu'à 25 km/h.
- Volet pliable manuellement sans la chenille.
- Chéminée d'éjection avec une plaque tournante à vis, déflecteur.
- Moderne éclairage routière du type LED.
- Prise de force.
- Propre système hydraulique.
- Système No-stress avec le compteur des motoheures.

Équipement optionnel:
- Essieu avec la suspension de ressort (à 40 km/h) ou la suspension pneumatique (à 80 km/h) - essieux équipées au frein pneumatique.
- Table de chargement pliable hydrauliquement (volet) avec la chenille de chargement.
- Tube d'éjection pliable hydrauliquement avec le contrôle automatique de la plaque tournante 240° et le déflecteur.
- Surélévation de la chéminée.
- Grue hydraulique.
- Contrôle au moyen de manche à balai.
Skorpion 350 RB je bubanjska drobilica, koja se može priključiti na traktor minimalne snage 100 KS (540 okr/min). S obzirom na značajne gabarite drobljenog materijala promjera do 25 cm drobilica je prilagođena za mehanički donos drveta uz pomoć hidrauličke dizalice. Na postolju drobilice predviđeno je mjesto za montažu dizalice. Veliki otvor za ulaz materijala, dimenzija 375x340 mm omogućuje drobljenje razgranatih grana.

U ovoj drobilici je instaliran sistem uvlačenja materijala koji se sastoji od nazubljenog valjka i tračne gusjenice dužine 680 mm. Za mehanički utovar drobilica može biti opremljena sa hidraulički sklopivim ulaznim stolom koji ima dodatnu tračnu gusjenicu dužine 600 mm.

Sistem za uvlačenje drva se pokreće uz pomoć hidraulične pumpe, koja je standardna oprema drobilice. Valjak i gusjenice se pokreću uz pomoć te pumpe putem sustava hidrauličnih motoreduktora.

Primjena sistema od 4 rezna noža koja su na bubnju smještena u sektorima (jedan okret bubnja na jedan puni rez) omogućuje postizanje velikih mogućnosti drobilice uz malu traktorsku snagu. Konstrukcija noževa omogućuje njihovo oštrenje tijekom eksploatacije od početne dužine do 55 mm, čime se produžuje vrijeme njihove uporabe.

Osiguranje sječke ujednačene veličine se postiže zahvaljujući primjeni sita koje je montirano ispod reznog bubnja. Sječku ispod sita preuzimaju dva pužna transportera do ventilatora uz čiju pomoć se sječka izbacije kroz cijev za izbacivanje sječke. Cijev za izbacivanje sječke se okreće ručno uz pomoć pužnog vijka i nazubljenog prszena za 360° (drobilica može u svojoj opremi imati također hidraulički sklopivu cijev za izbacivanje sječke zajedno sa automatskim zakretanjem do 240° i upravljanjem putem Joysticka).

Konstrukcija drobilice se nalazi na jednosovinskom podvozju, što omogućuje vuču stroja po svim vrstama prometnica. Tipična izvedba jedne osovine bez kočnice omogućuje Skorpionu 350 RB na kretanje brzinom do 25 km/h. Drobilica također može biti opremljena osovinom sa uljnim amortizerima (do 40 km/h) ili pneumatskim (do 80 km/h) – obje osovine imaju pneumatsku kočnicu.
Rješenje koje pruža mogućnost okomitog sklapanja stola za utovar tj. pod kutem od 90°, omogućuje istovremeni prijevoz drobilice i prikolice uz pomoć samo jednog traktora.

U standardnoj opremi Skorpiona 350 RB se nalazi najsuvremeniji u Europi sistem No-stress. On automatski spriječava preopterećenje pogonskog sistema putem zaustavljanja sistema za dodavanje.

Sječka koja se dobije od drvnog ostatka može se koristiti kao materijal za spaljivanje u pećima, sirovina za proizvodnju ploča za namještaj ili za daljnju preradu u mlinovima. Kupovina drobilice Skorpion 350 RB predstavlja optimalno rješenje za firme koje svoj razvoj temelje na ekološkoj viziji poslovanja.

Dimenzije (duž. x šir. x vis.) 4000 x 2260 (2760)* x [2650 standardna cijev za izbacivanje sječke] [2670 (4000)* sklopiva cijev za izbacivanje sječke] [mm]
Težina 2450 bez hidrauličkog krana** [kg]
Promjer (debljina) grana do 250 [mm]
Broj noževa 4 rezna + 1 kontra nož
Brzina dodavanja do 21 [m/min]
Kapacitet usitnjavanja do 16 [m3/h]
Veličina sječke do 28 [mm] ovisno o materijalu
Način dodavanja valjak i gusjenični transporter hidraulički pogonjen
Promjer bubnja 520 [mm]
Dimenzije ulaznog otvora (šir.x vis.) 375 x 340 [mm]
Dužina gusjenice stol 680, (klapa 600)*** [mm]
Sito (otvor) 30x30 ili 50x50 [mm]
Minimalna snaga traktora 100 [KS]

()* – dimenzije u rasklopljenom stanju.
()** – težina ovisna o opremi drobilice.
()*** – postoji opcija.

Standardna oprema:
• Za dozvoljenu brzinu na prometnicama 25 km/h.
• Ručno sklopiv ulazni stol bez gusjenice.
• Cijev za izbacivanje sječke sa kutom okretanja za 360°, i usmjerivačem sječke.
• Suvremena LED svjetla.
• Pogonska osovina.
• Vlastiti hidraulički sustav.
• Sistem za detekciju preopterećenja No–stress sa brojačem motosati.

Dodatna oprema:
• Osovina sa uljnim amortizerima (do 40 km/h) ili pneumatskim (do 80 km/h), osovine sa pneumatskom kočnicom.
• Hidraulički sklopiv ulazni stol sa gusjenicom za utovar.
• Hidraulički sklopiva cijev za izbacivanje sječke sa automatskim upravljanjem zakretanja do 240° i usmjerivačem sječke.
• Nadogradnja cijevi za izbacivanje sječke.
• Hidraulička dizalica (kran).
• Upravljanje pomoću Joysticka.
A Skorpion 350 RB dobos aprítógép mezőgazdasági vontatóval együttműködő, amely min. 100 LE (540 ford/perc) teljesítményű. Figyelemmel az aprítandó anyag 25 cm-ig terjedő nagy méreteire, az aprítógépet javasolt mechanikus fahulladék adagolóval alkalmazni hidraulikus daru (emelő) segítségével, az alapfelszereltségben megtalálható a rögzítéshez használható alaplap. A nagy terjedelemű fa adagolás, a garat mérete 375 x 340 mm lehetővé teszi az elágazó galyak és egyéb nagy térfogatú fahulladék aprítását.

Az aprítógépben alkalmazásra került fabehúzó rendszer, amely a lengőkarra épített fabehúzó és leszorító fogasgörgőből áll 380 mm átmérőben, valamint adagoló asztalból fogas lánctalpas adagolóval 680 mm hosszúságban, amely előtt kézzel zárható adagoló ajtó található. A mechanikai adagoláshoz az aprítógép felszerelhető hidraulikusan záródó adagoló ajtóval felszerelve 600 mm hosszú kiegészító lánctalpas adagolóval.

A fabehúzó rendszert hidraulikus szivattyú táplálja, ami az aprítógép alapfelszereltségét képezi, a görgő és a lánctalp vezérlése erről a szivattyútól történik hidraulikus motorokkal a reduktorokkal együtt.

A 4 vágókéses rendszer alkalmazása a dobon szektor rendszerben elhelyezve (a dob egy fordulata egy teljes vágásra) biztosítja az aprítógép széleskörű lehetőségeinek elérését a vontató teljesítményének viszonylagosan alacsony értéke mellett. A kések felépítése lehetővé teszi azok élezését a használatuk során a névleges hosszúságtól 55 mm-rel is, és ezzel egyidőben megnövekszik azok élettartama.

Az egységes méretű apríték biztosítása a vágódob alatt elhelyezett rostának köszönhető. A rosta alól az apríték eltávolítását két csigaszállító végzi a kidobó ventilátorhoz, amelynek segítségével az kidobásra kerül a kidobó csövön keresztül. Az aprítógépben alkalmazott kidobócső kézzel fordítható el 360°-ban csigafordító segítségével (az aprítógép felszerelhető hidraulikusan összecsukható kidobó csővel automatikus elfordítás vezérléssel 240°-ban, Joystick segítségével kivitelezve).

Az aprítógép szerkezete egytengelyű alvázra épült, ami lehetővé teszi a gép vontatását mindefajta úttípuson. A tipikus egytengelyű fék nélküli vontatás alkalmazása lehetővé teszi a Skorpion 350 RB számára a közlekedést 25 km/h-ig. Felszerelhető még ezen kívül rugózott felfüggesztésű tengellyel (40 km/h-ig) vagy pneumatikus felfüggesztéssel (80 km/h-ig) – mindkét tengely pneumatikus fékkel rendelkezik.

Az adagoló asztal elhelyezése 90°-ban a közlekedés irányára lehetővé teszi az aprítógép és utánfutó egyidejű vontatását egy vontató segítségével (az aprítógép rendelkezik automatikus vontató kapcsolóval).
A Skorpion 350 RB alapfelszereltségét képezi az Európában a legmodernebbnek számító No-stress rendszerek egyike. Automatikusan megelőzi a meghajtó rendszer túlterhelését az adagoló rendszer pillanatnyi megállításával.

A fahulladékból származó apríték felhasználható tüzelőanyagként, bútorlap gyártás alapanyagaként, vagy továbbfelszanálásra kalapácsos malmokban.

A Skorpion 350 RB aprítógép megvásárlása optimális megoldás cégek és vállalatok számára, akik tevékenységüket modern és ökológiai irányba fejlesztik.

Méretek (hossz x szélesség x magasság) ≈4000 x 2260 (2760)* [2650 alap kidobó cső] [2670 (4000)* összecsukott kidobó cső] [mm]
Tömeg 2450 hidraulikus daru nélkül** [kg]
Anyag átmérő törzs 250-ig [mm]
Kések száma 4 vágó + 1 álló [db]
Adagolási sebesség 21 -ig [fm/perc]
Apritás teljesitménye 16 -ig [m3/ó]
Apríték szélessége 28 mm-ig anyag függvényében
Adagolás fajtája görgő és lánctalpas adagoló hidraulikus meghajtással
Vágódob átmérője 520 [mm]
Adagolótorok mérete (szélesség x magasság) 375 x 340 [mm]
Lánctalp hossza (asztal 680), (ajtó 600)*** [mm]
Rosta (szem) 30x30 lub 50x50 [mm]
Vontató minimális teljesítménye 100 [LE]

()* – méret kinyitás után.
()** – a tömeg függ az aprítógép felszereltségétől.
()*** – opcionális lehetőség.

Alap felszereltség:
- Tengely 25 km/h-ig.
- Kézzel összecsukható adagoló ajtó lánctalp nélkül.
- Kidobócső csiga forgatással 360°, terelőlap.
- Modern LED közúti világítás.
- TLT.
- Saját hidraulika rendszer.
- Túlterhelés elleni No–stress rendszer üzemóra számlálóval.

Opcionális felszereltség:
- Rugózott (40 km/h-ig) vagy pneumatikus felfüggesztésű tengely (80 km/h-ig), a tengelyek felszerelve pneumatikus fékkel.
- Hidraulikusan összecsukható adagoló asztal (ajtó) adagoló lánctalppal.
- Hidraulikusan összecsukható kidobó kémény automatikus elfordítás vezérléssel 240° és terelő lappal.
- Kidobó kémény magasító.
- Hidraulikus daru (gém).
- Vezérlés Joystick segítségével.
Skorpion 350 RB is a drum model made in the form of a trailer, meant for collaboration with a min. 100 KM farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute.

The chipper is equipped with hydraulically folding loading table, in which a feeder track is installed. Pressing and waste-wood feeding into the cutting system is performed by toothed roll installed in a rocker. Both – the crawler and feeding roll are propelled by hydraulic motors powered by a hydraulic pump installed on board.

A sector-type drum with four cutting knives (one rotation of the drum for one full cut) allows to achieve a very high possibilities of the chipper with a relatively low power of the tractor. Knives can be sharpened several times, assuring theirs long-term use.

Installed screen ensures high regularity if chips. Chips are advanced from under the screen to the fan by two screw conveyors, than discharged thorough the ejection tube. Standard version of the chipper is equipped with manually swiveled by 360°ejection tube (optionally the chipper might be equipped with hydraulically foldable ejection tube with automatic swivel control by 240°, both controlled by joystick.

The construction of the chipper is set on a single axial chassis allowing the towing of the machine on all types of roads. As a standard, the machine is equipped with a rigid suspension without brake, allowing to move it with a speed up to 25 km/h. Chipper can also be equipped with a sprung axle and 40 km/h towing speed or an air-type suspension and 80 km/h speed – both axles are equipped with air brakes.

Loading table positioned at 90° to the direction of travel allows simultaneous transport of the chipper and trailer with a tractor (chipper is equipped with approved towing device).

Due to large size of the material to be chipped, the machine can be equipped with a hydraulic mounted crane.

The chipper is equipped with modern LED road lighting.

As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.

Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work. Total- and daily- hour meter is built into this system.

Chips made by Skorpion 350 RB can be used as a solid fuel for heating (burning in ovens/stoves), as a raw material for production of paper, furniture boards, and after additional disintegrating in a hammer mill for pellets and briquettes production.

Purchase of a chipper Skorpion 350 RB is the perfect solution for companies and businesses which develop their business in a modern and environmentally friendly direction.

Overall dimensions (LxWxH) 2800 (4000 with towing bar) x 2260 (2760)* x [2650 standard tube] [2670 (4000)* automatic tube] [mm]
Weight 2450** without hydraulic crane [kg]
Branch diameter logs up to 250 [mm]
No of knives 4 cutting + 1 counter-knife
Feeding speed up to 21 [running meters/min]
Chipping capacity up to 16 [stère meters/h]
Width of chips up to 28 depends on material [mm]
Drum diameter 520 [mm]
Hopper dimensions (WxH) 375 x 340 [mm]
Length of chain feeder loading table – 680 (flap 600)*** [mm]
Screen 30x30 or 50x50 [mm]
Min. power of tractor 100 [hp]

()* - unfolded, ready to work.
()** - weight depends on equipment installed.
()*** - available as an option.

Standard equipment:
- Axial chassis up to 25 km/h
- Manually folded flat without chain feeder
- Swivelled by360° ejection tube with deflector
- Modern LED road lighting
- PTO
- Own hydraulic system
- Electronic system of work control with hour meter

Optional equipment:
- Sprung axle (towing speed 40 km/h) or air-type suspension (up to 80 km/h) equipped with air brakes
- Hydraulically folding loading table (flap) equpped with a chain feeder
- Hydraulically foldable ejection tube with automatic control of swivel by 240 ° and deflector
- Extension of ejection tube
- Hydraulic crane
- Electronic control by joystick
Skorpion 350 RB is a drum model made in the form of a trailer, meant for collaboration with a min. 100 KM farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute.

The chipper is equipped with hydraulically folding loading table, in which a feeder track is installed. Pressing and waste-wood feeding into the cutting system is performed by toothed roll installed in a rocker. Both – the crawler and feeding roll are propelled by hydraulic motors powered by a hydraulic pump installed on board.

A sector-type drum with four cutting knives (one rotation of the drum for one full cut) allows to achieve a very high possibilities of the chipper with a relatively low power of the tractor. Knives can be sharpened several times, assuring theirs long-term use.

Installed screen ensures high regularity if chips. Chips are advanced from under the screen to the fan by two screw conveyors, than discharged thorough the ejection tube. Standard version of the chipper is equipped with manually swiveled by 360°ejection tube (optionally the chipper might be equipped with hydraulically foldable ejection tube with automatic swivel control by 240°, both controlled by joystick.

The construction of the chipper is set on a single axial chassis allowing the towing of the machine on all types of roads. As a standard, the machine is equipped with a rigid suspension without brake, allowing to move it with a speed up to 25 km/h. Chipper can also be equipped with a sprung axle and 40 km/h towing speed or an air-type suspension and 80 km/h speed – both axles are equipped with air brakes.

Loading table positioned at 90° to the direction of travel allows simultaneous transport of the chipper and trailer with a tractor (chipper is equipped with approved towing device).

Due to large size of the material to be chipped, the machine can be equipped with a hydraulic mounted crane.

The chipper is equipped with modern LED road lighting.

As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.

Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work. Total- and daily- hour meter is built into this system.

Chips made by Skorpion 350 RB can be used as a solid fuel for heating (burning in ovens/stoves), as a raw material for production of paper, furniture boards, and after additional disintegrating in a hammer mill for pellets and briquettes production.

Purchase of a chipper Skorpion 350 RB is the perfect solution for companies and businesses which develop their business in a modern and environmentally friendly direction.

Overall dimensions (LxWxH) 2800 (4000 with towing bar) x 2260 (2760)* x [2650 standard tube] [2670 (4000)* automatic tube] [mm]
Weight 2450** without hydraulic crane [kg]
Branch diameter logs up to 250 [mm]
No of knives 4 cutting + 1 counter-knife
Feeding speed up to 21 [running meters/min]
Chipping capacity up to 16 [stère meters/h]
Width of chips up to 28 depends on material [mm]
Drum diameter 520 [mm]
Hopper dimensions (WxH) 375 x 340 [mm]
Length of chain feeder loading table – 680 (flap 600)*** [mm]
Screen 30x30 or 50x50 [mm]
Min. power of tractor 100 [hp]

()* - unfolded, ready to work.
()** - weight depends on equipment installed.
()*** - available as an option.

Standard equipment:
- Axial chassis up to 25 km/h
- Manually folded flat without chain feeder
- Swivelled by360° ejection tube with deflector
- Modern LED road lighting
- PTO
- Own hydraulic system
- Electronic system of work control with hour meter

Optional equipment:
- Sprung axle (towing speed 40 km/h) or air-type suspension (up to 80 km/h) equipped with air brakes
- Hydraulically folding loading table (flap) equpped with a chain feeder
- Hydraulically foldable ejection tube with automatic control of swivel by 240 ° and deflector
- Extension of ejection tube
- Hydraulic crane
- Electronic control by joystick
Skorpion 350 RB is a drum model made in the form of a trailer, meant for collaboration with a min. 100 KM farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute.

The chipper is equipped with hydraulically folding loading table, in which a feeder track is installed. Pressing and waste-wood feeding into the cutting system is performed by toothed roll installed in a rocker. Both – the crawler and feeding roll are propelled by hydraulic motors powered by a hydraulic pump installed on board.

A sector-type drum with four cutting knives (one rotation of the drum for one full cut) allows to achieve a very high possibilities of the chipper with a relatively low power of the tractor. Knives can be sharpened several times, assuring theirs long-term use.

Installed screen ensures high regularity if chips. Chips are advanced from under the screen to the fan by two screw conveyors, than discharged thorough the ejection tube. Standard version of the chipper is equipped with manually swiveled by 360°ejection tube (optionally the chipper might be equipped with hydraulically foldable ejection tube with automatic swivel control by 240°, both controlled by joystick.

The construction of the chipper is set on a single axial chassis allowing the towing of the machine on all types of roads. As a standard, the machine is equipped with a rigid suspension without brake, allowing to move it with a speed up to 25 km/h. Chipper can also be equipped with a sprung axle and 40 km/h towing speed or an air-type suspension and 80 km/h speed – both axles are equipped with air brakes.

Loading table positioned at 90° to the direction of travel allows simultaneous transport of the chipper and trailer with a tractor (chipper is equipped with approved towing device).

Due to large size of the material to be chipped, the machine can be equipped with a hydraulic mounted crane.

The chipper is equipped with modern LED road lighting.

As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.

Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work. Total- and daily- hour meter is built into this system.

Chips made by Skorpion 350 RB can be used as a solid fuel for heating (burning in ovens/stoves), as a raw material for production of paper, furniture boards, and after additional disintegrating in a hammer mill for pellets and briquettes production.

Purchase of a chipper Skorpion 350 RB is the perfect solution for companies and businesses which develop their business in a modern and environmentally friendly direction.

Overall dimensions (LxWxH) 2800 (4000 with towing bar) x 2260 (2760)* x [2650 standard tube] [2670 (4000)* automatic tube] [mm]
Weight 2450** without hydraulic crane [kg]
Branch diameter logs up to 250 [mm]
No of knives 4 cutting + 1 counter-knife
Feeding speed up to 21 [running meters/min]
Chipping capacity up to 16 [stère meters/h]
Width of chips up to 28 depends on material [mm]
Drum diameter 520 [mm]
Hopper dimensions (WxH) 375 x 340 [mm]
Length of chain feeder loading table – 680 (flap 600)*** [mm]
Screen 30x30 or 50x50 [mm]
Min. power of tractor 100 [hp]

()* - unfolded, ready to work.
()** - weight depends on equipment installed.
()*** - available as an option.

Standard equipment:
- Axial chassis up to 25 km/h
- Manually folded flat without chain feeder
- Swivelled by360° ejection tube with deflector
- Modern LED road lighting
- PTO
- Own hydraulic system
- Electronic system of work control with hour meter

Optional equipment:
- Sprung axle (towing speed 40 km/h) or air-type suspension (up to 80 km/h) equipped with air brakes
- Hydraulically folding loading table (flap) equpped with a chain feeder
- Hydraulically foldable ejection tube with automatic control of swivel by 240 ° and deflector
- Extension of ejection tube
- Hydraulic crane
- Electronic control by joystick
Skorpion 350 RB is a drum model made in the form of a trailer, meant for collaboration with a min. 100 KM farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute.

The chipper is equipped with hydraulically folding loading table, in which a feeder track is installed. Pressing and waste-wood feeding into the cutting system is performed by toothed roll installed in a rocker. Both – the crawler and feeding roll are propelled by hydraulic motors powered by a hydraulic pump installed on board.

A sector-type drum with four cutting knives (one rotation of the drum for one full cut) allows to achieve a very high possibilities of the chipper with a relatively low power of the tractor. Knives can be sharpened several times, assuring theirs long-term use.

Installed screen ensures high regularity if chips. Chips are advanced from under the screen to the fan by two screw conveyors, than discharged thorough the ejection tube. Standard version of the chipper is equipped with manually swiveled by 360°ejection tube (optionally the chipper might be equipped with hydraulically foldable ejection tube with automatic swivel control by 240°, both controlled by joystick.

The construction of the chipper is set on a single axial chassis allowing the towing of the machine on all types of roads. As a standard, the machine is equipped with a rigid suspension without brake, allowing to move it with a speed up to 25 km/h. Chipper can also be equipped with a sprung axle and 40 km/h towing speed or an air-type suspension and 80 km/h speed – both axles are equipped with air brakes.

Loading table positioned at 90° to the direction of travel allows simultaneous transport of the chipper and trailer with a tractor (chipper is equipped with approved towing device).

Due to large size of the material to be chipped, the machine can be equipped with a hydraulic mounted crane.

The chipper is equipped with modern LED road lighting.

As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.

Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work. Total- and daily- hour meter is built into this system.

Chips made by Skorpion 350 RB can be used as a solid fuel for heating (burning in ovens/stoves), as a raw material for production of paper, furniture boards, and after additional disintegrating in a hammer mill for pellets and briquettes production.

Purchase of a chipper Skorpion 350 RB is the perfect solution for companies and businesses which develop their business in a modern and environmentally friendly direction.

Overall dimensions (LxWxH) 2800 (4000 with towing bar) x 2260 (2760)* x [2650 standard tube] [2670 (4000)* automatic tube] [mm]
Weight 2450** without hydraulic crane [kg]
Branch diameter logs up to 250 [mm]
No of knives 4 cutting + 1 counter-knife
Feeding speed up to 21 [running meters/min]
Chipping capacity up to 16 [stère meters/h]
Width of chips up to 28 depends on material [mm]
Drum diameter 520 [mm]
Hopper dimensions (WxH) 375 x 340 [mm]
Length of chain feeder loading table – 680 (flap 600)*** [mm]
Screen 30x30 or 50x50 [mm]
Min. power of tractor 100 [hp]

()* - unfolded, ready to work.
()** - weight depends on equipment installed.
()*** - available as an option.

Standard equipment:
- Axial chassis up to 25 km/h
- Manually folded flat without chain feeder
- Swivelled by360° ejection tube with deflector
- Modern LED road lighting
- PTO
- Own hydraulic system
- Electronic system of work control with hour meter

Optional equipment:
- Sprung axle (towing speed 40 km/h) or air-type suspension (up to 80 km/h) equipped with air brakes
- Hydraulically folding loading table (flap) equpped with a chain feeder
- Hydraulically foldable ejection tube with automatic control of swivel by 240 ° and deflector
- Extension of ejection tube
- Hydraulic crane
- Electronic control by joystick
Skorpion 350 RB jest rębakiem bębnowym, współpracującym z ciągnikiem rolniczym o min. mocy 100 KM (540 obr/min). Ze względu na znaczne gabaryty zrębkowanego materiału o średnicy do 250 mm rębak dedykowany jest do mechanicznego załadunku odpadów drzewnych za pomocą dźwigu (żurawia) (w standardzie wyposażony jest w podstawę do jego zamocowania). Duża przestrzeń załadunku drewna, gardziel o wymiarach 375 x 340mm umożliwia zrębkowanie rozłożystych gałęzi i innych objętościowo obszernych odpadów drzewnych.

Standardowo w rębaku zastosowano system wciągania drewna składający się z zabudowanej w wahaczu zębatej rolki wciągającej i dociskającej drewno o średnicy 380 mm oraz stołu załadowczego z zębatą gąsienicą długości 68 cm, którą poprzedza składana ręcznie klapa załadowca. Do załadunku mechanicznego rębak może być wyposażony w hydraulicznie składaną klapę załadowczą wyposażoną w dodatkową gąsienicę o długości 60 cm.

Rębak wyposażony jest w pompę hydrauliczną, z której zasilany jest układ wciągania drewna. Rolka i gąsienice napędzane są układem silników hydraulicznych wraz z reduktorami.

Zastosowanie układu 4 noży tnących na bębnie ustawionych sektorowo (jeden obrót bębna na jedno pełne cięcie) zapewnia osiągnięcie bardzo dużych możliwości rębaka przy stosunkowo małej mocy ciągnika. Konstrukcja noży umożliwia zostrzenie ich w okresie użytkowania z długości nominalnej nawet o 55 mm tym samym wydłużając ich żywotność.

W rębaku zastosowano sito o otworach 30x30 lub 50x50 mm, które zapewnia osiągnięcie regularnego zrębka. Zrębek wybierany jest spod sita dwoma przenośnikami ślimakowymi do wentylatora wyrzutowego i za jego pomocą wyrzucany rurą wyrzutową. Zastosowana w rębaku standardowa rura wyrzutowa obracana jest ręcznie za pomocą ślimakowej obrotnicy o 360° (rębak może być wyposażony również w hydraulicznie składaną rurą wyrzutową wraz z automatycznym sterowaniem obrotnicą 240° realizowaną za pomocą Joysticka).

Konstrukcja rębaka osadzona jest na podwoziu jednoosiowym, co pozwala na holowanie maszyny po wszystkich typach dróg. Standardowo zastosowana jest oś jezdna bez hamulca pozwalająca na poruszanie się z rębakiem z prędkością do 25 km/h. W opcji rębak może być wyposażony w oś jezdną z zawieszeniem resorowanym do 40 km/h lub zawieszeniem pneumatycznym do 80 km/h, osie te wyposażone są w hamulec pneumatyczny.

Rozwiązanie usytuowania stołu załadowczego pod kątem 90° w stosunku do kierunku jazdy pozwala na jednoczesny transport rębaka i przyczepy za pomocą jednego ciągnika (rębak posiada zaczep holowniczy).

Rębak wyposażony jest w nowoczesne LED-owe oświetlenie drogowe.

Rębak w standardzie wyposażony jest również w jeden z najnowocześniejszych elektronicznych systemów No-stress dostępnych na rynku europejskim, który automatycznie zapobiega przeciążeniu układu napędowego, poprzez czasowe zatrzymanie układu podającego. Edytowalne oprogramowanie systemu antyprzeciążeniowego No-stress pozwala w prosty sposób na zmianę ustawień pracy maszyny i dostosowanie do indywidualnych potrzeb. Program „grube drewno”, „cienkie drewno” umożliwia szybką zmianę trybu pracy rębaka celem dostosowania do aktualnie rozdrabnianego materiału i efektywniejszej pracy rębaka. System ten ma wbudowany licznik motogodzin.

Gabaryty (DxSxW) 4000 x 2260 (2760)* x [2650 standardowa rura wyrzutowa] [2670 (4000)* składana rura wyrzutowa] [mm]
Waga 2450** bez dźwigu [kg]
Średnica materiału pień do 250 [mm]
Ilość noży 4 tnące + 1 podporowy
Szybkość podawania do 21 [m/min]
Wydajność do 16 [m3/h]
Szerokość zrębka do 28 mm w zależności od materiału
Średnica cięcia bębna 520 [mm]
Długość gąsienicy stół 680, (klapa 600)*** [mm]
Sito 30x30 lub 50x50 [mm]
Wymiary gardzieli (Sz x W) 375 x 340 [mm]
Min. moc ciągnika 100 [KM]

()* - wymiar po rozłożeniu.
()** - waga zależna od wyposażenia rębaka.
()*** - występuje w opcji.

Wyposażenie standardowe:
• Oś jezdna do 25 km/h.
• Ręcznie składana klapa załadowcza bez gąsienicy.
• Rura wyrzutowa ze ślimakową obrotnicą 360°, deflektor.
• Nowoczesne LED-owe oświetlenie drogowe.
• Wałek odbioru mocy.
• Własny system hydrauliczny.
• System antyprzeciążeniowy No–stress z licznikiem motogodzin.

Wyposażenie opcjonalne:
• Oś jezdna z zawieszeniem resorowanym do 40 km/h lub zawieszeniem pneumatycznym do 80 km/h, osie wyposażone w hamulec pneumatyczny.
• Hydraulicznie składany stół załadowczy (klapa) wraz z gąsienicą załadowczą.
• Hydraulicznie składana rura wyrzutowa wraz z automatycznym sterowaniem obrotnicą 240° i deflektorem.
• Podwyższenie rury wyrzutowej.
• Hydrauliczny dźwig (żuraw).
• Sterowanie za pomocą Joysticka.

Zrębek uzyskany z odpadów drewnianych można przeznaczyć jako materiał energetyczny do spalania, surowiec do produkcji płyt meblowych lub do dalszego przerobu na młynach młotkowych.

Zakup rębaka Skorpion 350 RB jest optymalnym rozwiązaniem dla firm oraz przedsiębiorstw rozwijających swoją działalność w nowoczesnym i ekologicznym kierunku.
Skorpion 350 RB is a drum model made in the form of a trailer, meant for collaboration with a min. 100 KM farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute.

The chipper is equipped with hydraulically folding loading table, in which a feeder track is installed. Pressing and waste-wood feeding into the cutting system is performed by toothed roll installed in a rocker. Both – the crawler and feeding roll are propelled by hydraulic motors powered by a hydraulic pump installed on board.

A sector-type drum with four cutting knives (one rotation of the drum for one full cut) allows to achieve a very high possibilities of the chipper with a relatively low power of the tractor. Knives can be sharpened several times, assuring theirs long-term use.

Installed screen ensures high regularity if chips. Chips are advanced from under the screen to the fan by two screw conveyors, than discharged thorough the ejection tube. Standard version of the chipper is equipped with manually swiveled by 360°ejection tube (optionally the chipper might be equipped with hydraulically foldable ejection tube with automatic swivel control by 240°, both controlled by joystick.

The construction of the chipper is set on a single axial chassis allowing the towing of the machine on all types of roads. As a standard, the machine is equipped with a rigid suspension without brake, allowing to move it with a speed up to 25 km/h. Chipper can also be equipped with a sprung axle and 40 km/h towing speed or an air-type suspension and 80 km/h speed – both axles are equipped with air brakes.

Loading table positioned at 90° to the direction of travel allows simultaneous transport of the chipper and trailer with a tractor (chipper is equipped with approved towing device).

Due to large size of the material to be chipped, the machine can be equipped with a hydraulic mounted crane.

The chipper is equipped with modern LED road lighting.

As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.

Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work. Total- and daily- hour meter is built into this system.

Chips made by Skorpion 350 RB can be used as a solid fuel for heating (burning in ovens/stoves), as a raw material for production of paper, furniture boards, and after additional disintegrating in a hammer mill for pellets and briquettes production.

Purchase of a chipper Skorpion 350 RB is the perfect solution for companies and businesses which develop their business in a modern and environmentally friendly direction.

Overall dimensions (LxWxH) 2800 (4000 with towing bar) x 2260 (2760)* x [2650 standard tube] [2670 (4000)* automatic tube] [mm]
Weight 2450** without hydraulic crane [kg]
Branch diameter logs up to 250 [mm]
No of knives 4 cutting + 1 counter-knife
Feeding speed up to 21 [running meters/min]
Chipping capacity up to 16 [stère meters/h]
Width of chips up to 28 depends on material [mm]
Drum diameter 520 [mm]
Hopper dimensions (WxH) 375 x 340 [mm]
Length of chain feeder loading table – 680 (flap 600)*** [mm]
Screen 30x30 or 50x50 [mm]
Min. power of tractor 100 [hp]

()* - unfolded, ready to work.
()** - weight depends on equipment installed.
()*** - available as an option.

Standard equipment:
- Axial chassis up to 25 km/h
- Manually folded flat without chain feeder
- Swivelled by360° ejection tube with deflector
- Modern LED road lighting
- PTO
- Own hydraulic system
- Electronic system of work control with hour meter

Optional equipment:
- Sprung axle (towing speed 40 km/h) or air-type suspension (up to 80 km/h) equipped with air brakes
- Hydraulically folding loading table (flap) equpped with a chain feeder
- Hydraulically foldable ejection tube with automatic control of swivel by 240 ° and deflector
- Extension of ejection tube
- Hydraulic crane
- Electronic control by joystick
Skorpion 350 RB is a drum model made in the form of a trailer, meant for collaboration with a min. 100 KM farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute.

The chipper is equipped with hydraulically folding loading table, in which a feeder track is installed. Pressing and waste-wood feeding into the cutting system is performed by toothed roll installed in a rocker. Both – the crawler and feeding roll are propelled by hydraulic motors powered by a hydraulic pump installed on board.

A sector-type drum with four cutting knives (one rotation of the drum for one full cut) allows to achieve a very high possibilities of the chipper with a relatively low power of the tractor. Knives can be sharpened several times, assuring theirs long-term use.

Installed screen ensures high regularity if chips. Chips are advanced from under the screen to the fan by two screw conveyors, than discharged thorough the ejection tube. Standard version of the chipper is equipped with manually swiveled by 360°ejection tube (optionally the chipper might be equipped with hydraulically foldable ejection tube with automatic swivel control by 240°, both controlled by joystick.

The construction of the chipper is set on a single axial chassis allowing the towing of the machine on all types of roads. As a standard, the machine is equipped with a rigid suspension without brake, allowing to move it with a speed up to 25 km/h. Chipper can also be equipped with a sprung axle and 40 km/h towing speed or an air-type suspension and 80 km/h speed – both axles are equipped with air brakes.

Loading table positioned at 90° to the direction of travel allows simultaneous transport of the chipper and trailer with a tractor (chipper is equipped with approved towing device).

Due to large size of the material to be chipped, the machine can be equipped with a hydraulic mounted crane.

The chipper is equipped with modern LED road lighting.

As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.

Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work. Total- and daily- hour meter is built into this system.

Chips made by Skorpion 350 RB can be used as a solid fuel for heating (burning in ovens/stoves), as a raw material for production of paper, furniture boards, and after additional disintegrating in a hammer mill for pellets and briquettes production.

Purchase of a chipper Skorpion 350 RB is the perfect solution for companies and businesses which develop their business in a modern and environmentally friendly direction.

Overall dimensions (LxWxH) 2800 (4000 with towing bar) x 2260 (2760)* x [2650 standard tube] [2670 (4000)* automatic tube] [mm]
Weight 2450** without hydraulic crane [kg]
Branch diameter logs up to 250 [mm]
No of knives 4 cutting + 1 counter-knife
Feeding speed up to 21 [running meters/min]
Chipping capacity up to 16 [stère meters/h]
Width of chips up to 28 depends on material [mm]
Drum diameter 520 [mm]
Hopper dimensions (WxH) 375 x 340 [mm]
Length of chain feeder loading table – 680 (flap 600)*** [mm]
Screen 30x30 or 50x50 [mm]
Min. power of tractor 100 [hp]

()* - unfolded, ready to work.
()** - weight depends on equipment installed.
()*** - available as an option.

Standard equipment:
- Axial chassis up to 25 km/h
- Manually folded flat without chain feeder
- Swivelled by360° ejection tube with deflector
- Modern LED road lighting
- PTO
- Own hydraulic system
- Electronic system of work control with hour meter

Optional equipment:
- Sprung axle (towing speed 40 km/h) or air-type suspension (up to 80 km/h) equipped with air brakes
- Hydraulically folding loading table (flap) equpped with a chain feeder
- Hydraulically foldable ejection tube with automatic control of swivel by 240 ° and deflector
- Extension of ejection tube
- Hydraulic crane
- Electronic control by joystick
Skorpion 350 RB - это мобильная дробилка барабанного типа с приводом от вала отбора мощности. Skorpion 350 RB предназначена для тракторов мощностью от 100 л. с., (540 оборотов./мин).

Дробилка измельчает деревья диаметром до 250 мм. Рекомендуется механическая загрузка древесины с помощью манипулятора. Размер подающего окна - 375 x 340мм, это позволяет дробить широкие разнонаправленные ветви и крупную в диаметре древесину.

Система подачи состоит из зубчатого ролика диаметром 380 мм, который затягивает и сжимает материал, а также подающего стола с гусеничным зубчатым траспортёром, длиной 680 мм.

В виде опции можно приобрести гидравлически управляемый подающий стол с гусеничным траспортёром, длиной 600 мм. Подающая система в данном случае приходит в действие от гидронасоса, который входит в стандартный комплект оборудования дробилки. Зубчатый ролик и гусеничный зубчатый траспортёр также работают от гидронасоса через систему гидромторов вместе с редукторами.

Дробилка оснащена шестиножевым барабаном (один оборот барабана - одно резание). Благодаря этому обеспечивается высокая производительность даже в условиях сверхнагрузки. Ножи спроектированы по специальной технологии таким образом, что при стачивании до 55 мм не теряют своей функциональности.

За режущим барабаном распложено сито, что гарантирует оптимальный размер щепы. Щепа отводится из-под сита двумя шнековыми транспортерами к выхлопному вентилятору и с его помошью выбрасывается через щепапровод. Щепапровод вращается вручную на 360° (опционально существует возможность поставки машины с гидравлически складаемым щепопроводом и автоматическим управлением оборота на 240° осуществляемым с помощью джойстика).

Дробилка установлена на одноосевом шасси. Подходит для работы на различном дорожном покрытии. Skorpion 350 RB не оборудуется тормозной системой, тем самым может транспортироваться по дорогам со скоростью 25км/ч. Машина может быть оборудована осью с рессорной подвеской (до 40 км/ч) или пневмотической (80км/ч) – обе оси имеют пневматические тормоза.
Размещение подающего стола на 90° градусов по отношению к направлению движения дает возможность одновременной буксировки дробилки и прицепа одним трактором ( дробилка имеет зацеп для буксировки). Дробилка оснащена светодиодными фарами.

В стандартный комплект оборудования Skorpion 350 RB входит электронная система No-stress, которая временно останавливает подачу материала, тем самым предохраняя машину от перегрузки. Систему No-stress можно перепрограммировать так, чтобы приспособить настройки работы дробилки к индивидуальным требованиям клиента. Программы «крупная древесина» и «мелкая древесина» меняют режим работы измельчителя и повышают эффективность его работы.

Полученная щепа может быть использована как биотопливо, так и в качестве материала для производства мебельных плит.
Приобретение дробилки Skorpion 350 RB - отличное вложение капитала. Измельчитель спроектирован по самым современным технологиям, обладает высокой производительностью и экологически безопасен.

Габариты (дл.x шир.x выс.) 2800 (4000 с прицепом) x 2260 (2760)* x [2650 стандарт щепопровод] [2670 (4000)* складаемы щепопровод] [мм]
Вес 2450 без манипулятора **
Диаметр материала деревья до 250 [мм]
Количество ножей (в зависимости от барабана) 4 режущих и 1 контрнож [шт]
Скорость подачи до 21 [м/мин]
Производительность до 16 [м³/ч]
Ширина щепы до 28 мм в зависимости от материала
Диаметр режущего барабана 520 [мм]
Сито - ячейки 30х30 или 50 x 50 [мм]
Размер подающего окна (шир. x выс.) 375 x 340 [мм]
Длина гусеничного транспортёра стол 680, (платформа 600)***[мм]
Минимальная мощность трактора 100 [Л.С.] (Мин. мощность ВВП 80)

()* - размер в рабочем режиме.
()** - вес (габариты) зависит от опции в машине
()*** - выступает опционально

Стандартная комплектация:
• Ось до 25 км/ч.
• Вручную складываемый подающий стол без гусеничного транспортёра
• Щепопровод с вращением на 360°, заслонка.
• Современные светодиодные фары
• Вал отбора мощности.
• Собственная гидравлическая система.
• Система защиты привода от перегрузки No–stress со счетчиком моточасов

Опционально:
• Ось с рессорной подвеской до 40 км/ч или пневматической подвеской до 80 км/ч, ось оснащена пневматическим тормозом
• Гидравлически складаемый подающий стол ( платформа) вместе с гусеничным траспортёром
• Удлинение щепопровода
• Гидравлически складаемый щепопровод с автоматическим управлением вращения на 240° и заслонкой
• Манипулятор.
• Управление джойстиком.
Skorpion 350 RB is a drum model made in the form of a trailer, meant for collaboration with a min. 100 KM farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute.

The chipper is equipped with hydraulically folding loading table, in which a feeder track is installed. Pressing and waste-wood feeding into the cutting system is performed by toothed roll installed in a rocker. Both – the crawler and feeding roll are propelled by hydraulic motors powered by a hydraulic pump installed on board.

A sector-type drum with four cutting knives (one rotation of the drum for one full cut) allows to achieve a very high possibilities of the chipper with a relatively low power of the tractor. Knives can be sharpened several times, assuring theirs long-term use.

Installed screen ensures high regularity if chips. Chips are advanced from under the screen to the fan by two screw conveyors, than discharged thorough the ejection tube. Standard version of the chipper is equipped with manually swiveled by 360°ejection tube (optionally the chipper might be equipped with hydraulically foldable ejection tube with automatic swivel control by 240°, both controlled by joystick.

The construction of the chipper is set on a single axial chassis allowing the towing of the machine on all types of roads. As a standard, the machine is equipped with a rigid suspension without brake, allowing to move it with a speed up to 25 km/h. Chipper can also be equipped with a sprung axle and 40 km/h towing speed or an air-type suspension and 80 km/h speed – both axles are equipped with air brakes.

Loading table positioned at 90° to the direction of travel allows simultaneous transport of the chipper and trailer with a tractor (chipper is equipped with approved towing device).

Due to large size of the material to be chipped, the machine can be equipped with a hydraulic mounted crane.

The chipper is equipped with modern LED road lighting.

As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.

Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work. Total- and daily- hour meter is built into this system.

Chips made by Skorpion 350 RB can be used as a solid fuel for heating (burning in ovens/stoves), as a raw material for production of paper, furniture boards, and after additional disintegrating in a hammer mill for pellets and briquettes production.

Purchase of a chipper Skorpion 350 RB is the perfect solution for companies and businesses which develop their business in a modern and environmentally friendly direction.

Overall dimensions (LxWxH) 2800 (4000 with towing bar) x 2260 (2760)* x [2650 standard tube] [2670 (4000)* automatic tube] [mm]
Weight 2450** without hydraulic crane [kg]
Branch diameter logs up to 250 [mm]
No of knives 4 cutting + 1 counter-knife
Feeding speed up to 21 [running meters/min]
Chipping capacity up to 16 [stère meters/h]
Width of chips up to 28 depends on material [mm]
Drum diameter 520 [mm]
Hopper dimensions (WxH) 375 x 340 [mm]
Length of chain feeder loading table – 680 (flap 600)*** [mm]
Screen 30x30 or 50x50 [mm]
Min. power of tractor 100 [hp]

()* - unfolded, ready to work.
()** - weight depends on equipment installed.
()*** - available as an option.

Standard equipment:
- Axial chassis up to 25 km/h
- Manually folded flat without chain feeder
- Swivelled by360° ejection tube with deflector
- Modern LED road lighting
- PTO
- Own hydraulic system
- Electronic system of work control with hour meter

Optional equipment:
- Sprung axle (towing speed 40 km/h) or air-type suspension (up to 80 km/h) equipped with air brakes
- Hydraulically folding loading table (flap) equpped with a chain feeder
- Hydraulically foldable ejection tube with automatic control of swivel by 240 ° and deflector
- Extension of ejection tube
- Hydraulic crane
- Electronic control by joystick
Skorpion 350 RB je bubnový štiepkovač spolupracujúci s pôdohospodárskym ťahačom/traktorom s minimálnym výkonom 100KM (540 obr./min). Štiepkovač, vzhľadom na značné gabarity štiepkovaného materiálu s priemerom do 25 cm, je určený pre mechanické nakladanie dreveného odpadu pomocou hydraulického žeriavu (zdvihu) - štandardne je vybavený základom pre jeho upevnenie. Veľký priestor nakladania dreva - hrdlo s rozmermi 375 x 340 mm - umožňuje štiepkovanie rozložitých vetví a iných objemovo obšírnych drevených odpadov.

V štiepkovači je uplatnený systém vťahovania dreva, ktorý sa skladá z ozubeného valčeka vbudovaného v kyvadle, ktoré vťahuje a pritláča drevo s priemerom 380 mm a nakladajúceho stola s ozubeným húsenicovým podávačom dlhým 680 mm, pred ktorým je ručne skladaná nakladujúca klapka. Štiepkovač môže byť pre mechanické nakladanie vybavený hydraulicky skladanou, nákladajúcou klapkou, vybavenou dodatočným húsenicovým podávačom s dĺžkou 600 mm.

Sústava vťahovania dreva je napájaná hydraulickým čerpadlom, ktorým je štiepkovač štandardne vybavený. Toto čerpadlo poháňa valček a húsenice pomocou sústavy hydraulických motorov spolu s reduktormi.

Uplatnenie sústavy 4 rezacích nožov na bubne, ktoré sú sektorovo nastavené (jeden obrat bubna na jeden úplný rez) zaisťuje dosiahnutie veľmi veľkých možností štiepkovača pri pomerne malom výkone ťahača/traktora. Konštrukcia nožov umožňuje ich zostrenie behom používania z ich nominálnej dĺžky dokonca o 55 mm a tým predlžuje ich životnosť.

Zaistenie pravidelnej štiepky je možné vďaka uplatneniu sita namontovaného pod rezacím bubnom. Štiepky sú vyberané spod sita dvoma závitkovými dopravníkmi do vyhadzovacieho ventilátora a jeho pomocou vyhadzované vyhadzovacou rúrou. Vyhadzovacia rúra je v štiepkovači otáčaná ručne pomocou závitkovej točnice o 360° (štiepkovač môže byť tiež vybavený hydraulicky skladanou vyhadzujúcou rúrou spolu s automatickým ovládaním točnice o 240° vykonávaným pomocou Joysticka).

Konštrukcia štiepkovača je osadená na jednoosovom podvozku, čo umožňuje viezť zariadenie na cestách všetkého druhu. Typické uplatnenie jazdnej osi bez brzdy umožňuje Skorpionovi 350 RB sa pohybovať rýchlosťou do 25 km/hod. Môže tiež byť vybavený jazdnou osou s resorovanou (do 40 km/hod.) alebo pneumatickou nápravou (do 80 km/hod.) – obe osi majú pneumatickú brzdu.

Situovanie nakladajúceho stola s uhlom 90° voči smeru jazdy dovoľuje súčasný transport štiepkovača a prívesu pomocou jedného ťahača/traktora (štiepkovač má automatický ťahací záves).

Štiepkovač je vybavený moderným cestným osvetlením LED.

V štandardnom vybavení Skorpiona 350 RB je k dispozícii jeden z najmodernejších systémov No-stress v Európe. Automaticky zabraňuje preťaženiu pohonnej sústavy, a to vďaka prechodnému zastaveniu podávajúcej sústavy. Systém umožňuje veľmi jednoduchým spôsobom zmenu nastavení práce zariadenia a prispôsobenie jej individuálnym potrebám. Programy s názvom: „hrubé drevo” a „tenké drevo” umožňujú rýchlu zmenu režimu práce zariadenia. Je teda veľmi jednoduché prispôsobiť prácu štiepkovača aktuálne štiepenému materiálu, vďaka čomu sa zväčšuje jeho efektivita. Tento systém má vstavaný počítač motorohodín.

Štiepky získané z drevených odpadov je možné využiť ako energetický materiál na spaľovanie, surovinu pre výrobu nábytkových dosák alebo pre ďalšie spracovanie v kladívkových mlynoch.

Nákup štiepkovača Skorpion 350 RB je optimálnym riešením pre podniky a firmy, ktoré rozvíjajú svoju činnosť v rámci moderného a ekologického poňatia výroby.

Gabarity (délka x šířka x výška) 4000 x 2260 (2760)* x [2650 štandardná vyhadzovacia rúra] [2670 (4000)* skladaná vyhadzovacia rúra] [mm]
Hmotnosť 2450 bez hydraulického žeriavu** [kg]
Priemer materiálu kmeň do 250 [mm]
Počet nožov 4 rezacie + 1 podporný [ks]
Rychlost podávání do 21 [bm/min]
Výkon stroje do 16 [m3/h]
Šírka štiepky do 28 [mm] v závislosti na materiáli
Spôsob podávania valček a húsenicový podávač s hydraulickým pohonom
Priemer bubna 520 [mm]
Rozmery hrdla (šířka x výška) 375 x 340 [mm]
Dĺžka húsenice stôl 680mm, (klapka 600mm)*** [mm]
Sito (očko) 30x30 ili 50x50 [mm]
Minimálny výkon ťahača 100 [KM]

()* - rozmer po rozložení.
()** - hmotnosť závisí od vybavenia štiepkovača.
()*** - dostupný v opcii.

Štandardné vybavenie:
- Jazdná osa do 25 km/hod.
- Nakladajúci stôl je vybavený húsenicou a ručne skladanou nakladajúcou klapkou bez húsenice.
- Vyhadzovacia rúra so závitkovou točnicou 360°, deflektor.
- Moderné LED-ové cestné osvetlenie.
- Hriadeľ odberu výkonu
- Vlastný hydraulický systém
- Systém proti preťaženiu No–stress s počítačom motorohodín.
- Automatický odťahový úchyt pre príves.

Opčné vybavenie:
- Jazdná osa s resorovanou nápravou (do 40 km/hod.) alebo pneumatickou nápravou (do 80 km/hod.), osi vybavené pneumatickou brzdou.
- Hydraulicky skladaný nakladajúci stôl (klapka) spolu s nakladajúcou húsenicou.
- Hydraulicky skladaná vyhadzovacia rúra spolu s automatickým ovládaním točnicou 240° a deflektorom.
- Zvýšenie vyhadzovacej rúry.
- Hydraulický zdvih (žeriav).
- Ovládanie pomocou Joysticka.
Skorpion 350 RB je bubnjasta mašina za cepanje drveta, koji sarađuje sa tegljačem sa minimalnom jačinom - 80 KM (540 RPM). Obzirom na veći gabariti sečenog materijala sa presekom do 25 cm mašina je zamišljen za mehanički utovar drvenog otpada pomoću hidrauličke dizalice, standardno je opremljena u podlogu-osnovu za njeno pričvršćivanje. Veliki prostor utovara drveta, grlo u dimenzijama 375 x 340 mm omogućuju usitnjavanje široke grane kao i drugi drveni otpad velikog volumena.

U mašini za cepanje drveta primenjen je sistem uvlačivanja drveta, koji se sastoji od ograđenoj u šenuli zubčastoj rolni za uvlačenje i dotiskanje drveta sa presekom 380 mm i od stola za utovarivanje sa zubčastim guseničnim uvlakačom dužine 680 mm, ispred kojeg ima ručno sklapajujući se poklopac za utovar. Za mehanički utovar mašina može da bude opremljen u hidraulički sklapajući se poklopac za utovar sa dodatnim guseničnim uvlakačem dužine 600 mm.

Sistem za uvlačenje drveta napajan je napajan hidrauličnom pumpom, koja je opremljena standardna oprema mašina, rolne i gusenice su napajane od te iste pumpe pomoću sistema hidrauličkih motora i reduktora.

Primena sistema 4 noževa za sečenje u montiranih u bubnju na principia sektora (jedan obrt bubnja na jedan pun rez) garantuje postignuće velik mogućnosti mašine pored relativno male snage tegljača. Konstrukcija noževa omogućuje njihovo oštrenje o periodu korišćenja sa nominalnom dužinom čak za 55 mm što produžuje njihov život.

Dobijenje regularnih komada drvenog otpadnog materijala postiže se zahvaljujući primeni sita montiranog ispod bubnja za sečenje. Komadi su vađeni ispod sita pomoću dva pužasta prenosnika u ventilator za ispuštanje i uz njegovu pomoć ispuštan kroz cev za izbacivanje. Primenjena u mašini cev za ispuštanje, okreće se ručno pomoću pužaste okretnice sa 360° (mašina može biti opremljena takođe u hidrauličnu, sklapanu cev za ispuštanje zajedno sa automatski upravljanim okretačem 240° upravljanim pomoću Joysticka).

Konstrukcija mašina je montirana na jednoosovinskom šasiju, što omogućuje teglenje mašine po svim tipovima puteva. Tipična primena osovine bez kočnice omogućuje Skorpionu 350 RB kretanje sa brzinom do 25 km/h. Skorpion 350 RB može takođe biti opremljen u osovinu sa resorima (do 40 km/h) ili sa pneumatikom (do 80 km/h) – obe osovine imaju pneumatsku kočnicu.

Rešenje montaże stola za utovar pod uglom 90° prema pravcu kretanja, pozvoljava na istovremeni transport mašine za sečenje i prikolice pomoću jednog tegljača (mašina za sečenje ima automatsko kačenje za šlepovanje).

Skorpion 350 RB opremljen je u moderno putno osvetlenje LED.

Skorpion 350 RB standardno je opremljen u najmoderniji u Evropi sistem No-stress. Sistem taj automatski sprečava pretovar pogonskog sistema zahvaljujući vremenskom zaustavljanju sistema za utovar. Sistem pozvoljava na mnogo jednostavan način promeniti opcije rada mašine i prilagoditi ih individualnim potrebama. Program nazvan: „krupno drvo” i „sitno drvo” omogućuje brzu promenu načina rada uređaja. Tako da je mnogo jednostavno prilagoditi rad mašine aktualno usitnjavanom materijalu, zahvaljujući čemu raste njegova efikasnost. Sistem taj je ugrađen u brojač moto/satova.

Otpadni drvni materijal može da se nameni za energetski materijala za sagorevanje, sirovinu za proivodnju ploča za nameštaj ili za dalju preradu u mlinovima.

Nabavka mašine sa sečenje drva Skorpion 350 RB je optimalno rešenje za firme i preduzeća, koje razvijaju svoje poslovanje u modernom i ekološkom pravcu.

Dimenzije (dužina x širina xvisina) 4000 x 2260 (2760)* x [2650 standardna ispusna cev] [2670 (4000)* sklapana ispusna cev] [mm]
Težina 2450 bez hidrauličke dizalice ** [kg]
Prečnik materijala deblo do 250 [mm]
Količina noževa 4 za rezanje + 1 za potporu [kom.]
Brzina podavanja do 21 [mb/min]
Efikasnost sitnjenja zrębkowania do 16 [m3/h]
Širina komada do 28 [mm] zavisno od materiaala
Način podavanja rolna i gusenični uvlakač hidraulički pogon
Prečnik bubnja 520 [mm]
Dimenzije grla (šir. x vis.) 375 x 340 [mm]
Dužina gusenice sto 680, (poklopac 600)*** [mm]
Sito - oko 30x30 ili 50x50 [mm]
Minimalna snaga traktora 100 [KM]

()* - dimenzije po rasklapanju.
()** - težina zavisi od opreme mašine.
()*** - opcionalno.

Standardna oprema:
- Osovina jezdna do 25 km/h.
- Ručno sklapan poklopac za utovar bez gusenice.
- Ispusna cev sa spužastim okretačem 360°, deflektor.
- Moderno putničko osvetlenje LED.
- Valjak preuzimanja snage.
- Sopstven hidraučni sistem .
- Sistem protiv prekomernog opterećanja No–stress sa brojačem motosatova.

Opcionalna oprema:
- Osovina sa resorima zawieszeniem resorowanym (do 40 km/h) ili pneumatska (do 80 km/h), osovine opremljene u pneumatsku kočnicu.
- Hidraulički sklapan sto za utovar (poklopac) zajedno sa gusenicom za utovar.
- Hidraulički sklapana ispusna cev zajedno s automatski upravljanim obrtačem 240° i deflektorom.
- Povišana ispusna cev.
- Hidraulična automobilna dizalica.
- Upravljanje pomoćom Joysticka.
Skorpion 350 RB is a drum model made in the form of a trailer, meant for collaboration with a min. 100 KM farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 revolutions per minute.

The chipper is equipped with hydraulically folding loading table, in which a feeder track is installed. Pressing and waste-wood feeding into the cutting system is performed by toothed roll installed in a rocker. Both – the crawler and feeding roll are propelled by hydraulic motors powered by a hydraulic pump installed on board.

A sector-type drum with four cutting knives (one rotation of the drum for one full cut) allows to achieve a very high possibilities of the chipper with a relatively low power of the tractor. Knives can be sharpened several times, assuring theirs long-term use.

Installed screen ensures high regularity if chips. Chips are advanced from under the screen to the fan by two screw conveyors, than discharged thorough the ejection tube. Standard version of the chipper is equipped with manually swiveled by 360°ejection tube (optionally the chipper might be equipped with hydraulically foldable ejection tube with automatic swivel control by 240°, both controlled by joystick.

The construction of the chipper is set on a single axial chassis allowing the towing of the machine on all types of roads. As a standard, the machine is equipped with a rigid suspension without brake, allowing to move it with a speed up to 25 km/h. Chipper can also be equipped with a sprung axle and 40 km/h towing speed or an air-type suspension and 80 km/h speed – both axles are equipped with air brakes.

Loading table positioned at 90° to the direction of travel allows simultaneous transport of the chipper and trailer with a tractor (chipper is equipped with approved towing device).

Due to large size of the material to be chipped, the machine can be equipped with a hydraulic mounted crane.

The chipper is equipped with modern LED road lighting.

As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.

Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work. Total- and daily- hour meter is built into this system.

Chips made by Skorpion 350 RB can be used as a solid fuel for heating (burning in ovens/stoves), as a raw material for production of paper, furniture boards, and after additional disintegrating in a hammer mill for pellets and briquettes production.

Purchase of a chipper Skorpion 350 RB is the perfect solution for companies and businesses which develop their business in a modern and environmentally friendly direction.

Overall dimensions (LxWxH) 2800 (4000 with towing bar) x 2260 (2760)* x [2650 standard tube] [2670 (4000)* automatic tube] [mm]
Weight 2450** without hydraulic crane [kg]
Branch diameter logs up to 250 [mm]
No of knives 4 cutting + 1 counter-knife
Feeding speed up to 21 [running meters/min]
Chipping capacity up to 16 [stère meters/h]
Width of chips up to 28 depends on material [mm]
Drum diameter 520 [mm]
Hopper dimensions (WxH) 375 x 340 [mm]
Length of chain feeder loading table – 680 (flap 600)*** [mm]
Screen 30x30 or 50x50 [mm]
Min. power of tractor 100 [hp]

()* - unfolded, ready to work.
()** - weight depends on equipment installed.
()*** - available as an option.

Standard equipment:
- Axial chassis up to 25 km/h
- Manually folded flat without chain feeder
- Swivelled by360° ejection tube with deflector
- Modern LED road lighting
- PTO
- Own hydraulic system
- Electronic system of work control with hour meter

Optional equipment:
- Sprung axle (towing speed 40 km/h) or air-type suspension (up to 80 km/h) equipped with air brakes
- Hydraulically folding loading table (flap) equpped with a chain feeder
- Hydraulically foldable ejection tube with automatic control of swivel by 240 ° and deflector
- Extension of ejection tube
- Hydraulic crane
- Electronic control by joystick
Skorpion 350 RB - это мобильная дробилка барабанного типа с приводом от вала отбора мощности. Skorpion 350 RB предназначена для тракторов мощностью от 100 л. с., (540 оборотов./мин). Дробилка измельчает деревья диаметром до 250 мм. Рекомендуется механическая загрузка древесины с помощью манипулятора. Размер подающего окна - 375 x 340мм, это позволяет дробить широкие разнонаправленные ветви и крупную в диаметре древесину.
Система подачи состоит из зубчатого ролика диаметром 380 мм, который затягивает и сжимает материал, а также подающего стола с гусеничным зубчатым траспортёром, длиной 680 мм.
В виде опции можно приобрести гидравлически управляемый подающий стол с гусеничным траспортёром, длиной 600 мм. Подающая система в данном случае приходит в действие от гидронасоса, который входит в стандартный комплект оборудования дробилки. Зубчатый ролик и гусеничный зубчатый траспортёр также работают от гидронасоса через систему гидромторов вместе с редукторами.
Дробилка оснащена шестиножевым барабаном (один оборот барабана - одно резание). Благодаря этому обеспечивается высокая производительность даже в условиях сверхнагрузки. Ножи спроектированы по специальной технологии таким образом, что при стачивании до 55 мм не теряют своей функциональности.
За режущим барабаном распложено сито, что гарантирует оптимальный размер щепы. Щепа отводится из-под сита двумя шнековыми транспортерами к выхлопному вентилятору и с его помошью выбрасывается через щепапровод. Щепапровод вращается вручную на 360° (опционально существует возможность поставки машины с гидравлически складаемым щепопроводом и автоматическим управлением оборота на 240° осуществляемым с помощью джойстика).
Дробилка установлена на одноосевом шасси. Подходит для работы на различном дорожном покрытии. Skorpion 350 RB не оборудуется тормозной системой, тем самым может транспортироваться по дорогам со скоростью 25км/ч. Машина может быть оборудована осью с рессорной подвеской (до 40 км/ч) или пневмотической (80км/ч) – обе оси имеют пневматические тормоза.
Размещение подающего стола на 90° градусов по отношению к направлению движения дает возможность одновременной буксировки дробилки и прицепа одним трактором ( дробилка имеет зацеп для буксировки). Дробилка оснащена светодиодными фарами.
В стандартный комплект оборудования Skorpion 350 RB входит электронная система No-stress, которая временно останавливает подачу материала, тем самым предохраняя машину от перегрузки. Систему No-stress можно перепрограммировать так, чтобы приспособить настройки работы дробилки к индивидуальным требованиям клиента. Программы «крупная древесина» и «мелкая древесина» меняют режим работы измельчителя и повышают эффективность его работы.
Полученная щепа может быть использована как биотопливо, так и в качестве материала для производства мебельных плит.
Приобретение дробилки Skorpion 350 RB - отличное вложение капитала. Измельчитель спроектирован по самым современным технологиям, обладает высокой производительностью и экологически безопасен.

Габариты (дл.x шир.x выс.) 2800 (4000 с прицепом) x 2260 (2760)* x [2650 стандарт щепопровод] [2670 (4000)* складаемы щепопровод] [мм]
Вес 2450 без манипулятора **
Диаметр материала деревья до 250 [мм]
Количество ножей (в зависимости от барабана) 4 режущих и 1 контрнож [шт]
Скорость подачи до 21 [м/мин]
Производительность до 16 [м³/ч]
Ширина щепы до 28 мм в зависимости от материала
Диаметр режущего барабана 520 [мм]
Сито - ячейки 30х30 или 50 x 50 [мм]
Размер подающего окна (шир. x выс.) 375 x 340 [мм]
Длина гусеничного транспортёра стол 680, (платформа 600)***[мм]
Минимальная мощность трактора 100 [Л.С.]

()* - розмір розкладеного.
()** - маса залежить від комплектації подрібнювача.
()*** - у додатковій комплектації.

Стандартная комплектация:
• Ось до 25 км/ч.
• Вручную складываемый подающий стол без гусеничного транспортёра
• Щепопровод с вращением на 360°, заслонка.
• Современные светодиодные фары
• Вал отбора мощности.
• Собственная гидравлическая система.
• Система защиты привода от перегрузки No–stress со счетчиком моточасов

Опционально:
• Ось с рессорной подвеской до 40 км/ч или пневматической подвеской до 80 км/ч, ось оснащена пневматическим тормозом
• Гидравлически складаемый подающий стол ( платформа) вместе с гусеничным траспортёром
• Удлинение щепопровода
• Гидравлически складаемый щепопровод с автоматическим управлением вращения на 240° и заслонкой
• Манипулятор.
• Управление джойстиком.
Данное предложение носит ознакомительный характер. Точную информацию запрашивайте у продавца.
Отправить запрос продавцу